SUPER GLUE MINIS LIQUID BLISTER 3 X 1 G

SUPER GLUE MINIS LIQUID BLISTER 3 X 1 G


UHU45415
Vendor
UHU
Regular price
Rs 110.00
Sale price
Rs 110.00
Regular price
Sold out
Unit price
per 
Tax included. Shipping calculated at checkout.

Secure Checkout With

master visa banktransfer bankdeposit juice myt blink by Emtel pop cimfinance rogerscapital

DESCRIPTION

PROPERTIES

  • Ultra fast and extremely strong
  • 3 x originally sealed tubes
  • Perfect, ready-to-use glue quality for each application
  • Solid storage box
  • Reaches smallest corners and joints
  • Dishwasher proof and water resistant

APPLICATION

SUITABLE FOR:

Ideal for small-area bonds. Glues almost all solid and flexible materials like many plastics (such as rigid PVC, ABS, PS, Plexiglas®, polycarbonate (Makrolon®), and phenolic resins (Bakelite®)), porcelain, ceramics, leather, metal, wood, cork, felt, cloth (check suitability first), and rubber. Only partly suitable for glass (over a certain period of time the bond becomes brittle, causing it to weaken).

NOT SUITABLE FOR:

Not suitable for PE, PP, silicone resins, PTFE, Styrofoam®, fabrics and leather clothing.

HANDLING

BEFORE USE:

Working conditions

Do not use at temperatures below +10 °C. The glue responds best to an air humidity level of 50-70 %.

Surface requirements

Surfaces to be glued must be clean, dry, and free of dust and grease, and must fit exactly.

Preliminary surface treatment

Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.

DURING USE:

Directions for use

1. To pierce the membrane, turn the cap clockwise firmly onto the tube. Tip: do not press the tube while piercing. 2. Unscrew the cap to reveal the applicator. Apply the adhesive directly from the tube, using the nozzle, as thinly as possible onto one side (too much glue slows down the curing process significantly). Press parts together immediately. After use (if tube not yet empty), clean nozzle with a dry tissue and replace cap.

Advice

When glueing at low humidity, curing time can be shortened by briefly breathing onto one of the parts to be assembled. The best glueing results are reached at room temperature.

Points of attention

Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. May cause respiratory irritation. Avoid breathing vapours. Keep out of the reach of children.

AFTER USE:

Stains/residue

Wipe off excess glue immediately with a dry cloth. After curing, glue residue is very difficult to remove. Acetone will dissolve glue but very slowly (check suitability first).

Storage conditions

Store in a dry, cool, frost-free place. Storage below +5 °C (in refrigerator) ensures maximum shelf life.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
VIEW ALL