HUAWEI Freebuds 7i

SPECIFICATION

Each earbud

Height: 31.9 mm

Width: 21.0 mm

Depth: 24.6 mm

Weight: approx. 5.4 g

Charging case

Height: 57.8 mm

Width: 57.8 mm

Depth: 27.8 mm

Weight: approx. 36.5 g

*Actual dimensions may vary based on product configuration and manufacturing processes.

**Actual weight may vary based on product configuration and manufacturing processes.
11 mm quad-magnet dynamic driver unit

Frequency response range: 20 Hz to 40 kHz
Double-tap: play audio/pause audio/answer a call/end a call;

Triple tap: skip to the next track;

Swipe: increase the volume/decrease the volume;

Touch-and-hold: switch between noise cancellation modes/reject a call;
Bluetooth Compatibility

BT 5.4

Pop-Up Pair

Supported

Simultaneous Bluetooth connection with dual devices

Supported

*This feature requires Huawei phones running EMUI 10 or later.
Battery capacity

Earbuds: 55 mAh (minimum value each)

Charging case: 510 mAh (minimum value)

Charging Method

Wired charging: USB-C

Charge time

About 40 minutes for the earbuds (in the charging case)

About 1 hour for the charging case (wired)

Battery life

Music playback with the earbuds only (ANC OFF): 8 hours

Music playback with the earbuds only (ANC ON): 5 hours

Music playback with multiple charges in the case (ANC OFF): 35 hours

Music playback with multiple charges in the case (ANC ON): 20 hours

*The charging data comes from Huawei lab tests.

**Battery life data comes from Huawei labs. During the tests, audio was played at a 50% volume level in AAC mode and with ANC disabled, and while using a HUAWEI Mate 70 Pro phone. Actual battery life may vary depending on the volume level, audio source, environmental interference, product features, and usage habits.

***Battery life data comes from Huawei labs. During the tests, audio was played at a 50% volume level in AAC mode and with ANC enabled, and while using a HUAWEI Mate 70 Pro phone. Actual battery life may vary depending on the volume level, audio source, environmental interference, product features, and usage habits.
Infrared sensor, Hall sensor, Touch sensor, Gyroscope, Accelerometer, Bone voice sensor
Dynamic EQ/ANC/Awareness mode/Voice mode/Call noise cancellation
Earbuds

IP54

*IP54 dust- and water-resistance is only applicable to the earbuds themselves, not the charging case. This device is splash, dust, and water resistant in normal conditions. It was tested under controlled laboratory conditions and got an approved rating of IP54 under IEC standard 60529. Splash, dust, and water resistance are not permanent, and the performance may deteriorate due to daily wear-and-tear. Avoid charging the device in damp environments. Liquid damage is not covered under warranty.
Earbuds

Earbud × 2 (left and right)

Ear tips × 4 (available in large, medium, small, and ultra-small sizes; the medium-sized pair is attached by default.)

Charging case

Quick Start Guide and Safety Information × 1

Warranty Card × 1

BEANIES

Customer Reviews