ALL PURPOSE ADHESIVE SUPER BLISTER 7 G

Working conditions

Do not use at temperatures below +10 °C.

Surface requirements

Materials to be glued must be clean, dry and free of dust and grease.

Preliminary surface treatment

Any dust, oil, grease, wax or separating agent should be thoroughly removed from the surfaces to be stuck together. The best way to achieve this is to rub the parts a number of times with appropriate solvents, such as acetone (if suitable for the material – check first!). For metals and metal alloys it is usually sufficient to roughen the surface using emery paper or by grinding or brushing.

Directions for use

Surfaces to be glued together must be of exactly the same shape and size, dry and free of dust and grease. Apply a thin layer of adhesive to one side. Press parts together. Glue joint remains adjustable for approx. 20 seconds. After use, wipe the applicator tip dry and close firmly.

Advice

The thinner the glue layer, the faster and stronger the final bond.

Points of attention

Contains cyanoacrylate. Bonds skin and eyelids together in seconds. If product comes into contact with the eyes, rinse immediately with plenty of water and seek medical advice. In case of contact with skin, glue can be dissolved by soaking in warm soapy water. Then apply a skin cream. Keep out of the reach of children.

Stains/residue

Remove wet glue stains immediately with acetone. Hardened glue can only be removed mechanically.

Storage conditions

Store in a dry, cool and frost-free place.